BRAX MATRIX ML8 MID 2 x 200mm High-End Midwoofers
Highest degree of acoustic precision.
Highest degree of acoustic precision.
Highest degree of acoustic precision.
The legendary BRAX MATRIX loudspeaker series - which has been synonymous with sound quality at the highest level for many years - is now growing with the ML8 MID.
Developed and manufactured just as uncompromisingly as all BRAX loudspeakers, it pursues the goal of acoustic perfection
Made for ultimate kick bass dynamics
Anyone who has not been happy with 165 mm loudspeakers for their front system in search of maximum dynamics should now be able to achieve their goals with the ML8 MID. Every detail of this exceptional midwoofer is not only designed for perfect tonality, but also intended to convert even the highest amplifier power into sound pressure without compression. The combination with the ML10 subwoofer, ML3 midrange driver and the ML1 tweeter ultimately results in the "Dream Team" that can be realized in the vehicle.
MicroSphere - one material for two opposing requirements
The demand for maximum stiffness of the cone combined with maximum internal damping is like squaring the circle - but the unique MicroSphere" coating, in which hollow ceramic microspheres with a diameter of only 75 µm are integrated into a polymer layer and applied to the cone, makes the impossible possible. It gives the hand-made cone the highest degree of acoustic precision for an incomparable reproduction in the kick bass and lower midrange.
Timeless elegance
The clear, reduced design language is the hallmark of every BRAX product - the ML8 MID follows this philosophy unconditionally. The combination of the finest materials is once again clearly underlined by the optionally available MR8 stainless steel ring, turned from solid, which can be used as a mounting ring or to hold the grille, depending on the installation position. Of course, the ML8 MID is delivered hand-selected in pairs in an elegant wooden box and with its own serial number, which is recorded in a service database.
features
Extraordinarily stiff, hand-made paper cone with a new "MicroSphere" coating made of hollow ceramic microspheres, embedded in a polymer layer, enables the best impulse reproduction without any sound discoloration
Specially shaped rubber surround for maximum linear cone stroke
Hemispherical dust cap (dust cap) to optimize the frequency response in the mid-range
Large, protected ventilation openings in the pole core and basket ensure optimal cooling of the voice coil and minimal compression effects
Specially developed, aerodynamically optimized and particularly stable die-cast aluminum basket
Extremely precisely manufactured magnet system for an optimally linear magnetic flow
Massive connection terminals for large cable cross-sections
Technical specifications
Power RMS / Max. 200 / 400 watts
Impedance 4Ω
DC resistance 3.4Ω
Resonant Frequency 45Hz
Equivalent Volume 24L
Power Factor 7.40 m
Efficiency 1W/1m 89dB
Membrane Area 219 cm²
Moving Mass Mms 33.9g
Membrane Material Paper cone with "MicroSphere" coating made of hollow ceramic microspheres, embedded in a polymer layer.
Mechanical resistance rms0.81kg/s
Voice coil diameter 37mm
Voice coil winding width 18mm
Max. linear diaphragm stroke +/- 6mm
Outer Diameter 222mm
Installation Diameter 191mm
Installation Depth 92mm
Net volume 15 L
Lower cutoff frequency (-3dB) 60Hz
Bass reflex enclosure Not recommended