Micro Precision Z Studio 130 Midrange (5")
A pair of Z-Studio´s are the finest example of our engineering. Each pair is handmade. Magnets are produced in-house with a matched pair of membranes to find the best possible performance for one set. Each pair has a serial number and a registration in the production system.
Please note: Only available as part of custom build / Dealer fit.
A pair of Z-Studio´s are the finest example of our engineering. Each pair is handmade. Magnets are produced in-house with a matched pair of membranes to find the best possible performance for one set. Each pair has a serial number and a registration in the production system.
Please note: Only available as part of custom build / Dealer fit.
A pair of Z-Studio´s are the finest example of our engineering. Each pair is handmade. Magnets are produced in-house with a matched pair of membranes to find the best possible performance for one set. Each pair has a serial number and a registration in the production system.
Please note: Only available as part of custom build / Dealer fit.
Features :
Membrane specially made for transparent midrange. Surround geometry CAD constructed for best linearity. Maximized membrane surface in a small diameter. Membrane + Coil weight = 2,9 Gramm. Carefully assembled basket. 100% CNC produced. No tolerances, no ringing. Brass damping elements. Maximized venting effects coil and spider. 35 mm interior depth. This speaker needs filtering high pass > 150 Hz. With EQ, a full range setup from 150 Hz - 18 kHz.
The Z-Studio range shows, now after four years of research and development, five exclusive products to satisfy all listeners. All products follow the same philosophy. Only a stiff and light weighted membrane can follow the acceleration ! The tweeter has a moving mass <> 0.3 gram. This extreme low moving mass gives the possibility to reproduce every detail with full dynamic and without distortion. The midranges benefit because of the extreme stiffness from the „resin foam between 6µm Aluminium foils“ (patented 1935 in Germany, still produced in the 2nd generation). This high-tech membrane is handmade and the average production quantity is 1 piece per day. The membrane contents more then 80% air in the resin foam. Lowest weight combined with a maximum of stiffness and perfect acoustical behaviour is achieved because the membrane is based on natural materials. Can you imagine to use these perfect membranes in a perfect chassis ? We could and produced it, by using the finest CNC technology.